WELCOME TO RIVER DAVES PLACE

Candace Owens schools AOC

4Waters

4Waters

Well-Known Member
Joined
Aug 28, 2016
Messages
35,234
Reaction score
89,420
A fart could school AOC. That said AOC is more than welcome to come try my job any time, hell I'll make it easy on her, she can just run the concrete saw for the day. It's only about 1300lbs.

husqvarna-road-saw.jpg


Or she can chute 10 yards of concrete and control that chute on a 3% grade with one hand and control the placement/flow of the concrete with the other hand.

I'd bet that she would be looking for that freezer to cry in within an hour.
 
74 spectra20 v-drive

74 spectra20 v-drive

74 spectra20 v-drive
Joined
Nov 27, 2008
Messages
2,088
Reaction score
2,990
The problem with most liberals in lack of perspective. They have such grand opinions of themselves and are totally self absorbed that their entire reality is made up of their own experiences and most of them are seriously lacking. This AOC is the very same one that had no idea what a garbage disposal was when she moved to DC but yet the leftist fools believe she should be making policy. You need to experience life and gain some wisdom before you start telling the world how to act.
 
T

thetub

Well-Known Member
Joined
May 30, 2008
Messages
3,854
Reaction score
3,481
74 spectra20 v-drive said:
The problem with most liberals in lack of perspective. They have such grand opinions of themselves and are totally self absorbed that their entire reality is made up of their own experiences and most of them are seriously lacking. This AOC is the very same one that had no idea what a garbage disposal was when she moved to DC but yet the leftist fools believe she should be making policy. You need to experience life and gain some wisdom before you start telling the world how to act.
Click to expand...


paging @RodnJen
 
was thatguy

was thatguy

living in a cage of fear
Joined
Apr 28, 2008
Messages
53,350
Reaction score
102,418
500bbc said:
I have no idea what they are doing but it looks like death or dismemberment is but a short slip away.
Click to expand...

That’s an old school mousehole connection on a Kelly rig, using spinning chain and tongs.
They added a 30’ joint and resumed drilling, then loaded the next joint into the mousehole to get ready for the next one.
It looks like they are fast holing surface, so they probably do that about every 5-10 minutes for 12 hours, or until Surface is TD’d.

You don’t see that sort of process anymore except in West Texas.

Besides the obvious chemistry with these floor hands, keep in mind that the driller is off to the side out of frame. Everything you see moving is at the hands of the driller.
He’s running a lot of mechanical controls simultaneously with his eyes on the hands and not on the controls.
One single miscue and brains get splattered.

But yeah, tell us again about the strain of making a whiskey sour...
 
Last edited:
500bbc

500bbc

Well-Known Member
Joined
Oct 16, 2007
Messages
27,577
Reaction score
43,956
was thatguy said:
That’s an old school mousehole connection on a Kelly rig, using spinning chain and tongs.
They added a 30’ joint and resumed drilling, then loaded the next joint into the mousehole to get ready for the next one.
It looks like they are fast holing surface, so they probably do that about every 5-10 minutes for 12 hours, or until Surface is TD’d.

You don’t see that sort of process anymore except in West Texas.

Besides the obvious chemistry with these floor hands, keep in mind that the driller is off to the side out of frame. Everything you see moving is at the hands of the driller.
He’s running a lot of mechanical controls simultaneously with his eyes on the hands and not on the controls.
One single miscue and brains get splattered.

But yeah, tell us again about the strain of making a whiskey sour...
Click to expand...
Fucking BADASS!
 
YumaRivernaut

YumaRivernaut

How Far Off Was I?
Joined
Jun 24, 2019
Messages
5,022
Reaction score
7,921
4Waters said:
A fart could school AOC. That said AOC is more than welcome to come try my job any time, hell I'll make it easy on her, she can just run the concrete saw for the day. It's only about 1300lbs.

View attachment 949299

Or she can chute 10 yards of concrete and control that chute on a 3% grade with one hand and control the placement/flow of the concrete with the other hand.

I'd bet that she would be looking for that freezer to cry in within an hour.
Click to expand...
We're in the middle of lettuce season down here.
She can come down and put in 12 hour days bending over and hacking out lechuga heads with the "downtrodden migrants" she says she champions.
I'd give her less than an hour.
That's if she even showed up.
Fraudulent little communist.
aoc-fake-crying-at-fake-border-fence.jpg
 
J

JUSTWANNARACE

I will not let them take me🤣🤣
Joined
Aug 28, 2018
Messages
9,182
Reaction score
25,726
YumaRivernaut said:
We're in the middle of lettuce season down here.
She can come down and put in 12 hour days bending over and hacking out lechuga heads with the "downtrodden migrants" she says she champions.
I'd give her less than an hour.
That's if she even showed up.
Fraudulent little communist.
View attachment 949587
Click to expand...

Haha.. did alot of Sanddrag Racing in the lettuce fields in Dome Valley!
 
J

JUSTWANNARACE

I will not let them take me🤣🤣
Joined
Aug 28, 2018
Messages
9,182
Reaction score
25,726
J

JUSTWANNARACE

I will not let them take me🤣🤣
Joined
Aug 28, 2018
Messages
9,182
Reaction score
25,726
t&y

t&y

t&y
Joined
Jan 9, 2010
Messages
16,017
Reaction score
28,968
was thatguy said:
That’s an old school mousehole connection on a Kelly rig, using spinning chain and tongs.
They added a 30’ joint and resumed drilling, then loaded the next joint into the mousehole to get ready for the next one.
It looks like they are fast holing surface, so they probably do that about every 5-10 minutes for 12 hours, or until Surface is TD’d.

You don’t see that sort of process anymore except in West Texas.

Besides the obvious chemistry with these floor hands, keep in mind that the driller is off to the side out of frame. Everything you see moving is at the hands of the driller.
He’s running a lot of mechanical controls simultaneously with his eyes on the hands and not on the controls.
One single miscue and brains get splattered.

But yeah, tell us again about the strain of making a whiskey sour...
Click to expand...
Step dad was a geologist. We would go out to rigs in the middle of Utah, Wyoming, Colorado, etc... He also pointed out where the rough necks hung out and advised us to steer very clear of them. Said they lived up to their names... lol
 
J

JUSTWANNARACE

I will not let them take me🤣🤣
Joined
Aug 28, 2018
Messages
9,182
Reaction score
25,726
JUSTWANNARACE said:
My wife on running one of our bikes, the turbo/n2o bike of @n2otoofast4u ! Chuey runs a hell of a show! Always had a great time at that track!
View attachment 949627
Click to expand...

That was one of I think 5 or 6 bike she piloted that race for us! Pretty sure that was the national record on @n2otoofast4u class at that time, 350cc twin unlimited. And we also ended up with the 0-650cc N/A record that weekend!

I'll see if I can dig up more pics!
 
You must log in or register to reply here.
Top