107hp Banshee For Sale

[BONER]

2004 Limited Edition Custom Banshee - 1 of a kind. This Banshee was in a crate a few years ago as part of my buddies Grandfather's collection. When he passed, I was able to get my hands on this unit. I never put it together. I took it directly to DFR Racing in Mesa, AZ and they built the bike in 2015. The Banshee has 1 actual hour of run time. Cheetah Cub motor, 107hp, Forged Crank, Built Trans, PEP Suspension, 4+ Plus Swingarm, lightweight Skat's, wired with a LED Light Bar up front, Stabilizer, wide boy bars, CPI Exhaust, Big Carbs, too much to list, etc, etc.

Bike is located in Phoenix. This Bike is f***in' nasty and will peel the eyelids right off your face inside the Helmet. Lol

I have some idle and rev vids if you'd like me to Email them to you. Doesn't really do the bike much Justice as the "pop" and responsiveness in person will make you grin Ear to Ear.

$15,000

Taylor - 602-800-4716
[email protected]

 

[wsuwrhr]

I love me some Banshee, I have my own 100HP 535cc and it makes me giggle whenever I wick it.

If I needed two, I would be all over it, it sure looks clean.

Good luck with the sale.

 

[wsuwrhr]

I had to come back for another look.

Fuckinsexy machine.

 

[BONER]

I love me some Banshee, I have my own 100HP 535cc and it makes me giggle whenever I wick it.

If I needed two, I would be all over it, it sure looks clean.

Good luck with the sale.

Thanks Dude. If you know anybody, I'm all about paying Referral Fees.

 

[JUSTWANNARACE]

I love me some Banshee, I have my own 100HP 535cc and it makes me giggle whenever I wick it.

If I needed two, I would be all over it, it sure looks clean.

Good luck with the sale.

535cc so 64x73? Cheetah cyl?

 

[ONE-A-DAY]

that made my penis tingle. Love duning banshees, point and shoot.

 

[JUSTWANNARACE]

2004 Limited Edition Custom Banshee - 1 of a kind. This Banshee was in a crate a few years ago as part of my buddies Grandfather's collection. When he passed, I was able to get my hands on this unit. I never put it together. I took it directly to DFR Racing in Mesa, AZ and they built the bike in 2015. The Banshee has 1 actual hour of run time. Cheetah Cub motor, 107hp, Forged Crank, Built Trans, PEP Suspension, 4+ Plus Swingarm, lightweight Skat's, wired with a LED Light Bar up front, Stabilizer, wide boy bars, Toomey Exhaust, Big Carbs, too much to list, etc, etc.

Bike is located in Phoenix. This Bike is f***in' nasty and will peel the eyelids right off your face inside the Helmet. Lol

I have some idle and rev vids if you'd like me to Email them to you. Doesn't really do the bike much Justice as the "pop" and responsiveness in person will make you grin Ear to Ear.

$15,000

Taylor - 602-800-4716
[email protected]

View attachment 752585 View attachment 752586 View attachment 752587 View attachment 752588 View attachment 752589 View attachment 752590 View attachment 752591 View attachment 752592 View attachment 752593 View attachment 752594 View attachment 752595 View attachment 752596 View attachment 752597 View attachment 752598 View attachment 752599 View attachment 752600 View attachment 752601

Just a heads up, that is not a cub cyl, looks like a wampus cyl. Is it a mono block cyl or are they 2 seperate cyl?

Also those are CPI pipes not toomeys.

What is the stroke on the crank?
What is the bore size?

Nice lookin bike!

 

[BONER]

that made my penis tingle. Love duning banshees, point and shoot.

Come listen to and ride it. Tingle will go to FULL Blood Flow.

 

[BONER]

Just a heads up, that is not a cub cyl, looks like a wampus cyl. Is it a mono block cyl or are they 2 seperate cyl?

Also those are CPI pipes not toomeys.

What is the stroke on the crank?
What is the bore size?

Nice lookin bike!

Corrected the Ad for the Pipes.

+7mm Billet Crank

68mm Bore.

Big Bore Pipes.

 

[Hullbilly]

Pretty sure we need a vid, ya know just to make sure it runs!


Bad ass banshee!

 

[wsuwrhr]

535cc so 64x73? Cheetah cyl?

Yep

10mm billet stroker, different cylinder.

 

[wsuwrhr]

CPI big bores to be exact, same as on mine. I sent a PM though.

Just a heads up, that is not a cub cyl, looks like a wampus cyl. Is it a mono block cyl or are they 2 seperate cyl?

Also those are CPI pipes not toomeys.

 

[JUSTWANNARACE]

10mm billet stroker, different cylinder.

Trex? Superior sleeve? Pro x? Billet twister? One off? Lol

 

[wsuwrhr]

Trex? Superior sleeve? Pro x? Billet twister? One off? Lol

I want the guy who makes/made them, to roll his ass off a high bridge, and not accidently.

 

[JUSTWANNARACE]

I want the guy who makes/made them, to roll off a high bridge, and not accidently.

Haha "roll" noted.. know exactly who your talkin 'bout.. great cyl in their day

 

[BONER]

CPI big bores to be exact, same as on mine. I sent a PM though.

You can talk here, if you want. Not one to get all sideways about side convo's in my Threads.

Besides, keeps it bumped at the top.

 

[wsuwrhr]

I didn't want to dirty up your thread by correcting you. The bike is bad ass.

Made me go out and gander at mine.

It's a bad bitch.

what cc is yours?

You can talk here, if you want. Not one to get all sideways about side convo's in my Threads.

Besides, keeps it bumped at the top.

 

[wsuwrhr]

Also I bet it is a challenge to ride with only a +4 arm. Mine is either a +6 or +8, and on any decent incline if I don't sit up on the tank it wants to wheelie over.

Mine was right at 100HP on a wheel dyno 100 101 102.

 

[JUSTWANNARACE]

7mm= 61mm stroke 68mm bore so it would be 443cc

 

[wsuwrhr]

7mm= 61mm stroke 68mm bore so it would be 443cc

I was lazy and didn't want to do the math. Figured the OP would put it in his description

 

[Bpracing1127]

What gas is this running on. Is it still a 6 speed?

 

[J DUNN]

Sorry to get off topic but, NICE trackhawk in the background!!!!!! With that who needs a banshee!