RPM 26 Redline Pre Loto Testing

rpmpowerboats · Aug 28, 2012

Here's some testing before we went to the Lake of the Ozarks Shootout. We were a little over propped. Would have liked to have turned a few more RPM but I am happy with the outcome.

[video=youtube;3zwFRkSOjCc]http://www.youtube.com/watch?v=3zwFRkSOjCc&feature=plcp[/video]

milkmoney · Aug 28, 2012

:thumbsup:thumbsup

BarryMac · Aug 28, 2012

What speeds did you see at LOTO?

Love your boats, one of the nicest cats out there right now. :thumbsup

rpmpowerboats · Aug 28, 2012

BarryMac said:
What speeds did you see at LOTO?

Love your boats, one of the nicest cats out there right now. :thumbsup

Thanks for the compliment. We ran 133.

AZBrummett21 · Aug 28, 2012

So how did it run??

That Guy · Aug 28, 2012

That thing is awesome!

PokerRun388 · Aug 28, 2012

Boat looked great at LOTO, I was watching on the livecam.:thumbsup

BMABITY · Aug 28, 2012

Is this the same boat that had the #6 drive at DS? If so, why a switch in drives?

RiverDave · Aug 28, 2012

One of these days I'll get in one of those redlines! Awesome boats..

Hammer · Aug 28, 2012

Is there going to be an RPM at the RDP/BCM Poker Run ?

rpmpowerboats · Aug 28, 2012

BMABITY said:
Is this the same boat that had the #6 drive at DS? If so, why a switch in drives?

No. This is a completely different boat. The one with the #6 is running great. No issues at all.

BMABITY · Aug 28, 2012

rpmpowerboats said:
No. This is a completely different boat. The one with the #6 is running great. No issues at all.

Good to hear and looks like the SCX 4 with Cleaver is running great too. Do you have any pics of the boat in the video?

rpmpowerboats · Aug 28, 2012

BMABITY said:
Good to hear and looks like the SCX 4 with Cleaver is running great too. Do you have any pics of the boat in the video?

It's actually my personal boat we just repowered. Here are some pics.

fmo24 · Aug 28, 2012

Beautiful boat.

Joe mama · Aug 28, 2012

WOW! That is very nice and very clean.:thumbsup

bruddah · Aug 28, 2012

love how stable these 26's are at speed... one day... one day!:thumbsup:thumbsup:thumbsup

lake p.a.l. · Aug 29, 2012

You need a new speedo with the re-power!!

titanpb27 · Aug 29, 2012

Nice....video is good, but I need the real experience/ Guess I need to plan another trip to AL

rpmpowerboats · Aug 29, 2012

titanpb27 said:
Nice....video is good, but I need the real experience/ Guess I need to plan another trip to AL

You can come to AL or you can come and ride with me in two weeks at the Lake Cumberland Poker Run...Your choice! I always have a seat for you!

milkmoney · Aug 29, 2012

are you still building boats for customers?

rpmpowerboats · Aug 29, 2012

milkmoney said:
are you still building boats for customers?

YES! Is there a reason that I shouldn't be?

PokerRun388 · Aug 29, 2012

rpmpowerboats said:
You can come to AL or you can come and ride with me in two weeks at the Lake Cumberland Poker Run...Your choice! I always have a seat for you!

Lake Cumberland looks like a great run! Have fun out there.. Your 26's looked amazing at LOTO. Ran perfect on the livecam.:thumbsup

mariley85 · Aug 29, 2012

your boat is not quiiiteee crimson red

BMABITY · Aug 29, 2012

Before the re-power what drive did you run and how do you like the Cleaver style prop? How does the boat handle with the new setup compared to the previous?

NM Bullet · Aug 29, 2012

Hammer said:
Is there going to be an RPM at the RDP/BCM Poker Run ?

Not sure about that event. But ill have my boat at the Lake Powell Poker Run in mid September & Monster Bash. If you guys wana check it out just wave.

skav · Aug 29, 2012

rpmpowerboats said:
Here's some testing before we went to the Lake of the Ozarks Shootout. We were a little over propped. Would have liked to have turned a few more RPM but I am happy with the outcome.

Testing for LOTO 2012 Shoutout - YouTube

What motor is in it?

Sent from my iPhone using Tapatalk

copterzach · Aug 29, 2012

It looks like a door between the helms. What is behind the door??

Sent from South Texas

NM Bullet · Aug 29, 2012

skav said:
What motor is in it?

Brand new GT 1250.

NM Bullet · Aug 29, 2012

copterzach said:
It looks like a door between the helms. What is behind the door??

Thats correct, there is a cabin area down there. In Steve's boat its just open & plain. Ill get some pics of mine & post them up. It's well as Steve would say very fancy for a cat cabin.

milkmoney · Aug 29, 2012

rpmpowerboats said:
YES! Is there a reason that I shouldn't be?

no, i think you have every reason to build for a customer, jus asked cause we have not seen or heard of any new build threads from ya lately is all...

sorry if that ? offended you. i looked at your boats and think they are very nice..:thumbsup

rpmpowerboats · Aug 29, 2012

milkmoney said:
no, i think you have every reason to build for a customer, jus asked cause we have not seen or heard of any new build threads from ya lately is all...

sorry if that ? offended you. i looked at your boats and think they are very nice..:thumbsup

No offense taken just thought it was an interesting question. We just built a couple that are out west. Including the one that has the SSM6 drive that is responding to questions in this thread (NM Bullet). I guess I'm just not the bragging type enough!!

milkmoney · Aug 29, 2012

rpmpowerboats said:
No offense taken just thought it was an interesting question. We just built a couple that are out west. Including the one that has the SSM6 drive that is responding to questions in this thread (NM Bullet). I guess I'm just not the bragging type enough!!

ok fair enough, thank you.

:thumbsup

i dont speak for the members, but i would like to see some of your builds with some knowledge of that build...:thumbsup

rpmpowerboats · Aug 29, 2012

BMABITY said:
Before the re-power what drive did you run and how do you like the Cleaver style prop? How does the boat handle with the new setup compared to the previous?

Actually, before it was running a naturally aspirated 565 with an IMCO SC. It would consistently run 114 and was a little loose due to drive height and setup. Now, it is so hooked up that there is litterally no difference between running 90 and running 130+.

The drive height could stand to go up about 5/8" which would probably pick it up a bit but it is so stable that I don't think that it is worth it. I am still playing with props and gears. There is definitely more there. The 565 was still in the boat 2 1/2 weeks ago so we were kind of in crunch mode. Most of our friends told us we would never make it to LOTO. We actually were ready 3 days early but that's not enough time to do a gear change back and forth and be comfortably ready.

PokerRun388 · Aug 29, 2012

The 26s really looked good on the 1 mile course at LOTO. Nice, smooth, effortless runs, and extremely fast too. Sweet boats, for sure.:thumbsup

jayboat · Aug 30, 2012

Looked and sounded great.

skav · Aug 30, 2012

NM Bullet said:
skav said:

What motor is in it?

Brand new GT 1250.

Click to expand...

Curious what headers your running. Sport tubes or big tubes?

rpmpowerboats · Aug 30, 2012

PokerRun388 said:
The 26s really looked good on the 1 mile course at LOTO. Nice, smooth, effortless runs, and extremely fast too. Sweet boats, for sure.:thumbsup

Thanks to everyone for all of the compliments!! We are still dialing it in and may try a gear change after Cumberland.

As far as headers, they are Sport Tubes. The Big Tubes wont make the turn that we need in a Bravo style setup. Too close to the transom. Big tubes would probably help it rev on the top end. We are fighting an issue with the motor pulling like @#!! until about 5500 and then starting to lay over on pump gas (which is how we run it). We have not had enough time to really try to work through it so I'm sure it is something that we are doing since the dyno showed peak power at 6300. I really can't thank Rudy and Gary at GT Performance enough for all of their help.

rpmpowerboats · Aug 30, 2012

milkmoney said:
ok fair enough, thank you.:thumbsup

i dont speak for the members, but i would like to see some of your builds with some knowledge of that build...:thumbsup

We were going to do a build thread on the last couple we built but one customer did not want too much info out there. Then we got kind of behind on the next one and I was not going to sacrifice build time just to try to maintain a build thread. I did not feel it was fair to the customer. We are about to put one in the mold and I will try to start a build thread shortly (a month or so). In the mean time, here is a video of how we do Vaccuum Infusion on all of our boats. It really is a very cool process. It is hard to explain to people so we did a quick video that really helps people understand it.

[video=youtube;IQ8KP_t5eyc]http://www.youtube.com/watch?v=IQ8KP_t5eyc&feature=plcp[/video]

milkmoney · Aug 30, 2012

rpmpowerboats said:
We were going to do a build thread on the last couple we built but one customer did not want too much info out there. Then we got kind of behind on the next one and I was not going to sacrifice build time just to try to maintain a build thread. I did not feel it was fair to the customer. We are about to put one in the mold and I will try to start a build thread shortly (a month or so). In the mean time, here is a video of how we do Vaccuum Infusion on all of our boats. It really is a very cool process. It is hard to explain to people so we did a quick video that really helps people understand it.

RPM 26 Redline Hull Infusion - YouTube

thank you, i understand not wanting to sacrifice build time. looking forward to the new one comin out of the mold..:thumbsup
i appreciate your time and effort..

RPM 26 Redline Pre Loto Testing

Well-Known Member

Well-Known Member

An Adelanto 9...

Well-Known Member

It's a Brummett

Rack em'

Well-Known Member

Well-Known Member

In it to win it

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Attachments

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

naplesimage.com

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member