XXXXXX Billet porn, this kind should be illegal

I have about 300-400 hours in this project, I am close enough to release it.

I built a SuperJet GP 701 billet case, a Stock case as big as you can massage it will take a 12MM stroke, I built a case to start out at 16MM stroke. Works out to 1100 cc at max bore. I am hoping for 200HP, but will be happy at 180HP.

This motor is in most Yamaha jet skis sporting a twin(non GPR motor).

The potential is huge.

Bottom case half/top side OP1

Test fit crank.

top case half/bottom side

Top case half done. Billet cylinder sitting on it.

top half by itself. Intake not done yet.

Intake tract done

Tops and bottom all cozy

Mag side done

That is just sexy

Fuckin sick!!!!

RD

wow I think I just came..... thanks

Bad fockin Ass!!!

Thanks for the cool words guys.

I definitely have a ton of time in the cases. Does anyone want a set for their 701 based Yamaha twin? I could get you all set up with a 200HP motor.

Brian

Thats some awesome machine work.

thats sick, now that you have done one how long would it take you to do another?

whiteworks said:

thats sick, now that you have done three how long would it take you to do another?

Click to expand...

Fixed your post for you....

Ten takes two weeks.

Brian

When the youtube video of this bad boy running?

Kindsvater Flat said:

When the youtube video of this bad boy running?

Click to expand...

You tube?

I have no skills when it comes to making movies.

Brian

I'd sweep your shop floor for months if you'd show me how to do stuff like
that....


very cool...

--Sherpa

Are you furnishing the broom?

This shit is easy....

Sherpa said:

I'd sweep your shop floor for months if you'd
show me how to do stuff like
that....


very cool...

--Sherpa

Click to expand...

Is it done?

brendellajet said:

Is it done?

Click to expand...

Been done. I just got in material this week to make more. Want one?

That is sick Brian the best I have ever seen. thanks for sharing it.
:thumbsup

Hallett said:

That is sick Brian the best I have ever seen. thanks for sharing it.
:thumbsup

Click to expand...

Awesome!!!

Wow....Thank you!!

wsuwrhr said:

Been done. I just got in material this week to make more. Want one?

Click to expand...

No, but I'd like to see a pic of it :hmm

brendellajet said:

No, but I'd like to see a pic of it :hmm

Click to expand...

A pic of what?

The material?

Brian

Did you eat paint chips as a kid?

A pic of the completed motor!

brendellajet said:

Did you eat paint chips as a kid?

A pic of the completed motor!

Click to expand...

Are you kidding, I still eat them

There are 10 pics, I couldn't figure out what you were asking. haha

Brian

Sooooooooo bad ass. I used to modify the crap out of those motors, they made good power then, that thing there is going to rip.

wsuwrhr said:

Click to expand...

I meant finished, like with parts in side, installed in the boat, etc.

brendellajet said:

A pic of the completed motor!

Click to expand...

#1 of 2 DASA/SB Products all billet 1000cc monsters that went across the pond this week.

Brian

Awsome! Do you do any SeaDoo stuff? Or even interested,,,pm me bro! :thumbsup

There is interest in a SeaDoo 4tec. Please pm me. Thanks

James

HOSS said:

There is interest in a SeaDoo 4tec. Please pm me. Thanks

James

Click to expand...

Sent you a PM

Can I borrow that program ? LOL VEry nice work!!!!

gabe79 said:

Can I borrow that program ? LOL VEry nice work!!!!

Click to expand...

Sure you can.

Thanks!!

Brian

man that is f-ing sick can i ask what machine drawing and tool pathing program you used and how or where did you git the specs on all the parts? tell me you drew the whole thing

TORE BACK said:

man that is f-ing sick can i ask what machine drawing and tool pathing program you used and how or where did you git the specs on all the parts? tell me you drew the whole thing

Click to expand...

I did draw the whole thing. It is based on the Yamaha twin GP 701/760 jet ski engine.

Brian

what programs do you use

TORE BACK said:

what programs do you use

Click to expand...

Program?

NC programs, of course bud.

I made my own NC software.

Brian

WOW!!!!!!

Earl-Bob said:

WOW!!!!!!

Click to expand...

Hey thanks!!

Man, you should go into biz building repro Merc 2.5/260 blocks. Merc gets ~$3500 or so for a new one, DEALER. Retail is like $7100!

I'm sure you could build billet ones for that! Hell, I thought so, so I started on drawing it at one time...never finished though...figured I could never afford to build it, so why bother. It was fun while I was working on it though.

Everything but the thru bore is like grade-school. Hell you even did the hard work already.

When are we starting? Is there a market? I would do it in a heartbeat.

Brian

STV_Keith said:

Man, you should go into biz building repro Merc 2.5/260 blocks. Merc gets ~$3500 or so for a new one, DEALER. Retail is like $7100!

I'm sure you could build billet ones for that! Hell, I thought so, so I started on drawing it at one time...never finished though...figured I could never afford to build it, so why bother. It was fun while I was working on it though.

Click to expand...