more arizona drama

Looks great bro!!! We should be on the water about the same time.....just cant leave these boats alone!!! I might start a thread with the Skater over here. I should be picking it up soon and then straight down to Larrys to put the power back in. We have to run them this year for sure..

Erik

Lookin' good! Those motors are impressive! What HP they going to put out?

By the way, what boat are they going in? What's it look like?

erik i would love to see how your boat comes out:thumbsup im thinking 2-3 weeks from floating this thing so ya it would be great to run'em a bit. tank, well these were 600sc's that i put better blowers on at first. then last winter i decided to freshen them up a bit. well, after pullin them down we found .012 piston to wall clearance:grumble: so new pistons and holes were needed. at this point it took on a whole new direction but not losing track of the fact i have no windshield or canopies. so with a very tame tune i am hoping to see 750hp each so it runs on 91oc and will live long. that increase alone should put this boat to a very good mph for what it is. time will tell
oh.... its a 31'ao and had run into the 120's :thumbsup

well not much more to show at this point. i did get the trim pumps in and lines hooked up.. (not sure about the way they lay:grumble now just need to fix the touchups and drop the engines in:thumbsup

im not going to look for the other thread so here are the latest pix for you guys and gals.:thumbsup

NICE :thumbsup

BTW your blower is too small. You should immediately remove it and replace it with the correct size.:skull

Lookin good!! :champagne::champagne:

I heard you almost cut your finger off the other day... :thumbsdown hope you are okay!

both are in and got alot done the past 2 days. waiting on the correct hose to come in (thanks jegs:swear) once that is here i can put them in and hang exhaust:thumbsup hope to be makin noise very soon

Oooooh! Shiney!! :thumbsup:thumbsup

lol didnt cut anything off just a lil slitnothing a paper towel and electrical tape didnt fix for the day.

ya those are now a bit small for what were doing but i dont have room to go bigger on the blowers plus then go crank fire ignition etc etc etc. this will be plenty fast the way it is:thumbsup

Looking good Sean! When's it supposed to get wet? I'm getting tired of tying up with the yahoos on Sundays

im trying im trying. it will get wet during the week so im not around the yahoos.

Sean post some pictures of the boat.. Like the larger version of your avatar etc..

RD

I hope i'm on the right track. Is this build for the AO 3100? If so, is that porpoise normal? I was thinking about that boat but not if it has that.

sean said:

im trying im trying. it will get wet during the week so im not around the yahoos.

Click to expand...

Understood! Maybe I'll have to "cough" "cough" call in sick one of these days

no that hop was not normal. it was the cause of poor setup all fixed now and she flys flat n fast.
her's a few dave

pro, not to start a rant or anything but you have to be VERY careful with ao's there have been too many owners of that company and some years the boats are just flat out unsafe imo. MAKE SURE YOU HAVE IT SURVEYED! if you buy the right one you will enjoy a fun boat. i didnt do this and have spent almost what i bought it for making it right. if you want to know more pm me and ill give ya my number. sean

oh dave thanks for putting the 2 threads together. off to work on it more bye for now

well got a few more things done will post pix later

That is a nice ride Sean. You work looks great!

XTRM22 said:

I had to go find this video and post it, it's me and Sean in his AO31 about 2 years ago. It's been dialed in since, but at the end of this pass I was lookin for the pickup man to come ridin past so I could bail off!!!
http://s85.photobucket.com/albums/k49/XTRM22/?action=view&current=TheHop.flv

Click to expand...

Hmmm, I think I recognize that video

sean said:

both are in and got alot done the past 2 days. waiting on the correct hose to come in (thanks jegs:swear) once that is here i can put them in and hang exhaust:thumbsup hope to be makin noise very soon

Click to expand...

What kind of hose do you need? , I have a ton of stuff left over from mine.
Call me

H2oSki2Fast said:

Click to expand...

YESSSSSSSS!! thanks bud cant wait to put it on:thumbsup hell this thing will be all new when done. all the bad ju ju has been removed

well today i should get the hose from jegs and that moves things along fast. once i have that done i will take more pix:thumbsup

sean said:

well today i should get the hose from jegs and that moves things along fast. once i have that done i will take more pix:thumbsup

Click to expand...

Get it done.


Looks awesome

Lookin god Sean...thing will look good heading up and down Parker this summer :thumbsup

Don't let me chick see your boat...she loves AO and will want to drive it

im trying to hurry :thumbsup

thanks lynch not as nice as your bildge but not too shabby.

Looking good! Can't wait to see it out on the water.

rD

ok i need help! i just recieved my hose from jegs and... wrong! anyone on here work for aeroquip or sell their stuff. im tired of dealing with the yahoos at jegs.:swear

few more pix for ya

Sean,
Go see Steve Erhrenberg (he owns it) over at Alternative Hose on 35th ave 1/2 mile north of thomas east side of road. They do all our hose stuff at work and he is also the guy with that sweet ass 25 daytona rigged by Phil. They will have what you need.

Donnie said:

Sean,
Go see Steve Erhrenberg (he owns it) over at Alternative Hose on 35th ave 1/2 mile north of thomas east side of road. They do all our hose stuff at work and he is also the guy with that sweet ass 25 daytona rigged by Phil. They will have what you need.

Click to expand...

called him thursday and he doesnt have that hose. said week to 2 weeks to get it and 50' min order

sean said:

called him thursday and he doesnt have that hose. said week to 2 weeks to get it and 50' min order

Click to expand...

Lookin sweeeeet.:boobeyes: New battery box?

yup anything to clean up a crappy rig job

fuuuuuuck that thing is coming together nice....Can't wait to see it on the water.

Damn. I am impressed!

well, today was close to the last day of wrenching:champagne: as you can see in the pix i got my last package in the mail and put it on. big thanks to h2oski2fast:thumbsup much easier to install than i remember. hatch,drives,lil snip snaps here n there and it's a floatin:boobeyes:

sean said:

well, today was close to the last day of wrenching:champagne: as you can see in the pix i got my last package in the mail and put it on. big thanks to h2oski2fast:thumbsup much easier to install than i remember. hatch,drives,lil snip snaps here n there and it's a floatin:boobeyes:

Click to expand...

Sean.... LOOKS Very clean ....you did a great job:thumbsup:thumbsup

thank you. ill put pix of it all done:champagne:

Right on dude...looks sweet:boobeyes: You gonna be ready for the lake Saturday?:champagne:

Nice Job There Leroy:champagne::thumbsup

Donnie said:

Right on dude...looks sweet:boobeyes: You gonna be ready for the lake Saturday?:champagne:

Click to expand...

How about Sunday, Sunday, Sunday

still need to ziptie more stuff after the hatchrams are in and she be finished. here's last pix you get until its on the water guys. whew... i see some light at the end of this here tunnel lol :champagne:

thank you for the kind words guys. makes all this work worth it:thumbsup

guess i better check the chemicals in da pool oops

sean said:

guess i better check the chemicals in da pool oops

Click to expand...

LOL

cant go to the river so make the pool look like it lol :grumble:

sean said:

guess i better check the chemicals in da pool oops

Click to expand...

Hell I thought it was probably green from one of those skanks you where bangin in there:drunk:rotflmao:

Looks great! Can't wait to see it on the water...I'll be out Sunday:champagne:

I was going to comment on the pool but it looks like I was way behind